Core Drill Bits for Extremely Hard Ceramics, 80407E

Article No.	Core Drill Bit	galvan. Diamond Rim Height	Price excl. VAT	19% VAT	Price incl. VAT
Article No.	Diameter / Length	Height	Euro/pc	Euro/pc	Euro/pc
80417.03	3 x 20 mm	3,5 mm	8,90	1,69	10,59
80417.04	4 x 20 mm	3,5 mm	9,50	1,81	11,31
80417.05	5 x 20 mm	3,5 mm	10,50	2,00	12,50
80417.06	6 x 20 mm	3,5 mm	11,90	2,26	14,16
80417.08	8 x 20 mm	3,5 mm	13,90	2,64	16,54
80417.10	10 x 20 mm	3,5 mm	14,90	2,83	17,73
80417.12	12 x 20 mm	3,5 mm	16,20	3,08	19,28
80417.15	15 x 20 mm	3,5 mm	17,50	3,33	20,83
80417.16	16 x 20 mm	3,5 mm	18,80	3,57	22,37
80417.18	18 x 20 mm	3,5 mm	19,50	3,71	23,21
80417.20	20 x 20 mm	3,5 mm	20,00	3,80	23,80
80417.22	22 x 20 mm	3,5 mm	20,90	3,97	24,87
80417.25	25 x 20 mm	3,5 mm	21,80	4,14	25,94
80417.28	28 x 20 mm	3,5 mm	22,50	4,28	26,78
80417.30	30 x 20 mm	3,5 mm	23,90	4,54	28,44
80417.32	32 x 20 mm	3,5 mm	25,20	4,79	29,99
80417.35	35 x 20 mm	3,5 mm	29,00	5,51	34,51
80417.40	40 x 20 mm	3,5 mm	30,20	5,74	35,94
80417.45	45 x 20 mm	3,5 mm	33,50	6,37	39,87
80417.50	50 x 20 mm	3,5 mm	36,00	6,84	42,84
Kindly read befor use - with larger boring diameters do not start vertically but slightly tilted and after you have found a start move slowly into vertiacal posiston before real boring - do not exert much pressure while boring; - during boring slightly rotate boring axis to remouve material out of boring hole, - when boring mounted tiles change the drill bit after you are through with the tile and do not bore into the concrete - make sure that always water is added during boring - before you start a second boring remove the boring core of the previous boring out ouf the drill bit

TableOfContent Start Page Quantity Discounts and Terms of Delivery
Email Diamond Tools GmbH

Copyright � 1998, 2007, Dr. Heinemann Diamond Tools & Parts GmbH

Kindly have a Look at our Quantity Discounts
80417	Galvanized Diamond Core Drill Bits for EXTREMELY HARD CERAMICS
	with 9,5 mm Shaft for Boring Machines